Afternoon all!
Got a 2014 L200 Trojan here & the DPF & EML are on. Scanned it & got;-
P1498 DPF overloading.
U1102 ASC CAN time out/not fitted.
U1101 T/M CAN timeout/not fitted.
Did an oil service as it was due banyway & still got same codes. Went into live data & got DPF absolute pressure 0, DPF difference pressure 1.09Psi, Soot load by pressure diff 12.75 g/l. Doesnt seem excessive but EML & DPF lit & in limp mode. Cleaned out both tubes to DPF & no difference.
Anyone come across this before & is there a work around for it?
Many thanks all!