For Sale » New Shape Skid Plates

#1 by LezT , Sun Aug 18, 2013 7:52 pm

Both plates in 4mm steel (instead of the tin stuff they originals are made of), I am just sourcing the centre bolts as the originals are not long enough for two plates, already tested on an 08 plate I have in the yard so I know they fit well..

£140 the pair....Painted in Red Oxide Delivered mainland.

#2 by Basil , Sun Aug 18, 2013 8:31 pm

sounds bloody marvellous Lez, stick me down for a set? plus a tenner extra for delivery to skye?

#3 by steve.c , Sun Aug 18, 2013 8:34 pm

I have all 3 here so I will paint them tomorrow for you lez sam said yes you can use here shipping company to ship them out

#4 by LezT , Sun Aug 18, 2013 8:39 pm

Quote: steve.c wrote in post #3
I have all 3 here so I will paint them tomorrow for you lez, sam said yes you can use our shipping company to ship them out

I already know mate she phoned me earlier to say,, will you please keep up....

Quote: Basil wrote in post #2
sounds bloody marvellous Lez, stick me down for a set? plus a tenner extra for delivery to skye?

Have to get Sam to check the cost Bas.
Miss samantha could you ask your delivery man if they can ship to The Isle of Skye please..and a cost.

#5 by steve.c , Sun Aug 18, 2013 8:44 pm

I will have to phone them as geff lives on is own island way up there but should be ok

#6 by LezT , Sun Aug 18, 2013 8:47 pm

Quote: steve.c wrote in post #5
I will have to phone them as geff lives on is own island way up there but should be ok

Many of dem tanking tings to ye miss Sam...

#7 by Deleted User , Sun Aug 18, 2013 8:59 pm

wish this was done a few years ago when i got hold of them drawings

#8 by LezT , Sun Sep 01, 2013 6:15 am

Both plates in 4mm steel (instead of the tin stuff they originals are made of), I am just sourcing the centre bolts as the originals are not long enough for two plates, already tested on an 08 plate I have in the yard so I know they fit well..

£140 the pair....Painted in Red Oxide Delivered mainland.

Just a bump on this as they will be hitting eBay later today.....At £190 delivered.

#9 by skotl , Sun Sep 01, 2013 11:34 am

I'll have a set then, please, Lez.
Mrs will notice if they're red, but seems too good an opportunity to pass up.

Cheers

#10 by LezT , Sun Sep 01, 2013 11:40 am

May be able to change a colour, grey primer is possible, or some sort of mud colour if we mix the two..

#11 by skotl , Sun Sep 01, 2013 11:44 am

Nah If you're not going orange then it needs to be red!

£££ sent

#12 by skotl , Thu Sep 05, 2013 12:45 pm

Quote: LezT wrote in post #1
...I am just sourcing the centre bolts as the originals are not long enough for two plates, already tested on an 08 plate I have in the yard so I know they fit well...

Hey, Lez... what size bolts did you go with and was it just the centres that needed to be replaced? I feel a trip to Halfords coming on...

Cheers

#13 by LezT , Thu Sep 05, 2013 12:47 pm

I had some that we're around 40mm here, admit to forgetting to get them or send hem, sorry....

#14 by skotl , Thu Sep 05, 2013 12:48 pm

Nae worries - will go pick some up. As I'm 12 miles away from the motor, do you recall what M-size they are?

Ta

#15 by skotl , Sat Sep 07, 2013 1:39 pm

Fitted!

Got new M8 x 20mm bolts x 4 for the outsides and M8 x 40mm x 2 for the centre. Fits perfectly but, in hindsight, an extra pair of hands or using a jack would have made it easier!

Bild entfernt (keine Rechte)

Bild entfernt (keine Rechte)

Bild entfernt (keine Rechte)

LezT!

#16 by LezT , Sat Sep 07, 2013 2:29 pm

Good job mate, they look as good as the ones I fitted on the 08 plate, yours seemto have a better paint job on though, must remember to complain next time I talk to the seller, Apologies about the bolts, the centre ones were the only ones that actually needed changing though ( thinking out loud here)

#17 by skotl , Sat Sep 07, 2013 2:48 pm

I painted 'em with hammerite red, Lez. The oxide covering was a bit hit and miss, to be honest.

Do fit perfect, tho, and a hell of a sight cheaper than asfirs

I changed the 20mm bolts too cos mine had been off so often they were knackered.

#18 by Warriorbez , Sat Sep 07, 2013 2:50 pm

Looks good

Looks Ard as nails (for a pram!)

(Red-much better than that popular orange that's been around for a while now!)

#19 by 123hotchef , Sat Sep 07, 2013 2:58 pm

like it cant wait for my classic ones

#20 by marcosuk , Sat Sep 07, 2013 6:50 pm

They look spot on!

#21 by LezT , Sat Sep 07, 2013 6:53 pm

2 sets left at the moment..for the new shapes..

#22 by 123hotchef , Sat Sep 07, 2013 8:37 pm

do u still have to old shapes?

#23 by LezT , Sat Sep 07, 2013 8:57 pm

Yours are safe Mr Lee as are the other 5 I am holding for people, this leaves 4 set's of classics still available.....I only had 3 new shapes made and 10 classics.

#24 by jimmythesaint , Thu Jan 09, 2014 10:43 am

Wow they look the nuts, any new shapes left ;) ? Thanks

#25 by LezT , Thu Jan 09, 2014 8:43 pm

Sorry peps not doing any more at the moment, maybe towards the summer ..

Posts:	18.434
Date registered	10.01.2011

Posts:	12.392
Date registered	03.07.2012

Posts:	308
Date registered	06.14.2013

Posts:	18.434
Date registered	10.01.2011

Posts:	308
Date registered	06.14.2013

New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates

RE: New Shape Skid Plates