Egr confusion
#1 by
dazmanf
, Thu Aug 07, 2014 2:11 pm
Bild entfernt (keine Rechte)
So I'm gonna remove egr but I can only spot the egr pipe not the cooler like on the warrior. Mine is a 2001.
Can't see where the pipe will go to bypass the water when all is removed.
Anyone help on this one?
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
- Attached pictures:
-
You do not have the necessary rights to view attached pictures
- dazmanf
-
Posts: 2.987 Date registered 09.07.2012
RE: Egr confusion
#2 by
123hotchef
, Thu Aug 07, 2014 2:46 pm
The older trucks had no cooler mate. Dont worry
AREA REPRESENTATIVE: South East England
'PYROCHEF'
- 123hotchef
- Forum Legend
-
Posts: 34.226 Date registered 02.15.2012
RE: Egr confusion
#3 by
123hotchef
, Thu Aug 07, 2014 2:48 pm
There shouldn't be any water pipes to extend join or bypass
AREA REPRESENTATIVE: South East England
'PYROCHEF'
- 123hotchef
- Forum Legend
-
Posts: 34.226 Date registered 02.15.2012
RE: Egr confusion
#4 by
dazmanf
, Thu Aug 07, 2014 3:12 pm
Thanks folks, mate Simon clued me in there to, I was looking for the big cooler like on my warrior. What a waste of heater pipe lol
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
- dazmanf
-
Posts: 2.987 Date registered 09.07.2012
RE: Egr confusion
#5 by
123hotchef
, Thu Aug 07, 2014 3:26 pm
Keep it behind the back seats it will come in handy at some point
AREA REPRESENTATIVE: South East England
'PYROCHEF'
- 123hotchef
- Forum Legend
-
Posts: 34.226 Date registered 02.15.2012
RE: Egr confusion
#6 by
dazmanf
, Thu Aug 07, 2014 3:41 pm
Aye, prob just hang on to it
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
- dazmanf
-
Posts: 2.987 Date registered 09.07.2012
RE: Egr confusion
#7 by
dazmanf
, Thu Aug 07, 2014 4:11 pm
All done now, two way bolts decided to come out and had to hunt the garage for replacements.
Goodbye after thought egr, you will not be missed
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
- dazmanf
-
Posts: 2.987 Date registered 09.07.2012
RE: Egr confusion
#8 by
123hotchef
, Thu Aug 07, 2014 4:21 pm
Come out where
AREA REPRESENTATIVE: South East England
'PYROCHEF'
- 123hotchef
- Forum Legend
-
Posts: 34.226 Date registered 02.15.2012
RE: Egr confusion
#9 by
dazmanf
, Thu Aug 07, 2014 4:32 pm
From the bottom part of the egr, the lock nuts were supposed to go on them, replaced with straight bolts
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
- dazmanf
-
Posts: 2.987 Date registered 09.07.2012
RE: Egr confusion
#10 by
123hotchef
, Thu Aug 07, 2014 4:47 pm
As long as it dont leak jobs a good un
AREA REPRESENTATIVE: South East England
'PYROCHEF'
- 123hotchef
- Forum Legend
-
Posts: 34.226 Date registered 02.15.2012
RE: Egr confusion
#11 by
dazmanf
, Thu Aug 07, 2014 4:57 pm
Don't you be jinxing me lol
2003 warrior RIP Monday 10th February 2014
2001 trojan green over silver, 30mm wheel spacers, all terrains, side steps removed, egr blanked, air con unit, rad and tension plate removed.
Trojan died the ole bitch, driving a Peugeot 406 now ffs
- dazmanf
-
Posts: 2.987 Date registered 09.07.2012
