Mates truck l200 k74 won't bow any air through the vents at all. He's changed the fuse changed the control panel. Anyone else have any ideas.

Fan knackered??

Daz

12v straight up the fans shirt via a power probe to see if it fires up. If the fan works my guess is earth resistor shagged.

Am not too sure really. I thought it could be the fan due to it not blowing any air through it. Do we know how much these are or if you can even get them?

Fan should be heard running if it's working,if it's not blowing air through then it could be a disconnected hose.im only guessing of course

Daz

Am not too sure really. I thought it could be the fan due to it not blowing any air through it. Do we know how much these are or if you can even get them?

I assume it would be more the fan motor possibly. I think it's not working at all

When you switch the blowers on at the dashboard....do you here a whirring sound?

No it's not making any noise at all. But he's changed the control unit over thinking that it would solve the problem. But hasn't. He's checked the fuse that's fine. Dsnt really have any other ideas and we're both a bit stuck about it.

Sounds like the blower, check all connections are on the actual fan , and you are getting power to it, as its a dash out job I beleive to replace the blower

As Spud says,check that your getting power at the fan to eliminate your power supply and if you have power then check out any fan components that can cause the fan not to work and test them also.If they are ok then replace the fan motor.Hope that helps.Elimination,elimination 😙

I would think that due to the rarelty of your problem you will find one in a scrap yard no problem.

Whys this blinking post keep quoting post 6 in the subject box ... I keep changing it!

ah ... sorted hopefully


PS .. thats why some of the posts are editted!

Spotted it and confused me 😕
Longest post heading ever,

Good old spud, Rab & Ronnie c ....lol