My lever is very imprecise I think the bushings may be gone.
Has anyone replaced these or got any other suggestions?
Ta

Does the stick centralise back to the 3rd/4th position when you let it go from 1st/2nd or 5th/reverse? or is it just very hard to select any gear?

yes more info needed really

Sorry been busy under the truck
I have an old single cab and the gear lever is precise
On me new truck (double cab 2001) the lever is very hard to locate into gear and has a lot of free play
I think that the linkage is not located properly or the nylon bushes are worn or missing
What do you think?

take the stick out 4 bolts easy and check the nylon bush on the bottom it just pops off and is pence for a new one,

Got the stick out the nylon bush seems too big to go in the gate without twisting it sideways so

Do I put the bush on the gearstick and force it in or put the bush in the gearbox and just plonk the gear lever on?
If the latter how do you know it's on properly?
The old bush seems ok but
I bought a new one anyway

when i changed my clutch the other week I didnt even touch the bush it stayed on the end of the stick and went back in without a problem