Ask an Expert..... » Another pulley bolt not moving

#1 by AD , Tue Mar 31, 2015 8:30 pm

Any ideas on how to get it out,tried cranking engine still wont budge H E L P.

AD

#2 by Nick , Tue Mar 31, 2015 8:47 pm

1/2" air impact gun

#3 by woody13 , Tue Mar 31, 2015 8:48 pm

or bigger..?

#4 by robert3040 , Tue Mar 31, 2015 8:53 pm

As big a piece of scaffolding pole you can get.

#5 by 123hotchef , Tue Mar 31, 2015 9:46 pm

really the cranking engine trick failed!? never seen that fail before did u do it correctly

#6 by AD , Tue Mar 31, 2015 9:55 pm

Quote: 123hotchef wrote in post #5
really the cranking engine trick failed!? never seen that fail before did u do it correctly

Which way would you do it??

#7 by Greigboy , Tue Mar 31, 2015 11:45 pm

Impact gun is probably best, but if you don't have access to air tools, I'd slide the starter out and lock the flywheel with a pry bar, half inch drive bar onto it and use scaffolding tube for extra leverage if required

Posts:	4.731
Date registered	04.13.2014

Posts:	6.932
Date registered	10.02.2011

Posts:	12.549
Date registered	10.05.2011

Posts:	7.027
Date registered	05.09.2012

Posts:	34.226
Date registered	02.15.2012

Another pulley bolt not moving

RE: Another pulley bolt not moving

RE: Another pulley bolt not moving

RE: Another pulley bolt not moving

RE: Another pulley bolt not moving

RE: Another pulley bolt not moving

RE: Another pulley bolt not moving