Hi guys I have a 2006 l200 2.5td K74 my sliders are stuck in the calliper carriers good an proper,, does any one know where I can just get the carriers from ? I need both sides, it’s the twin piston type,

Thanks

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Hello Nemisis,

Sounds like you have the same truck as me. I had the same problem, you should be able to work the pins free using a vice and a good bit of elbow grease. Mine cleaned up well and I didn’t neeed to replace the pins.
If you are unlucky and need new carriers, take a look on eBay.

Hope this helps mate

Hi ,

Will try taking working the pins out with some heat, and will buy some new sliders I couldn’t find the carriers to suit on eBay

yeh i have done the same of a few trucks now good old clean out with wire brushes and drill bits new sliders and the nproper grease jobs a good un

As Chef says , should be no need to replace the carriers IF you can get the sliders out ( Heat and a vice worked for me ) . Once out get a set of wire brushes ( bottle type ) that go on a drill , and give the inside a good going over , it will be full of old grease and crap, then get proper grease ( not copper grease or standard grease ) and sliders and should be ok

Thanks guys appreciate it will take them off this wkend 👍

Hi guys, thanks for the advice saved myself some money not buying new carriers down to you,I persevered and got all the sliders out

Thanks

Good result, always like to hear people saving money!