Hi all.
I have a 2016 l200 barbarian which I love.
Unfortunately both of the barbarian led sill lights have stopped working. All other interior lighting still works.
I wondered if anyone had any idea what it could be. Ie fuse or relay change etc.
Any help would be much appreciated.
Thank you in advance.
Regards
Barry.
I seem to recall there is a small rectifier or inverter or something that can go faulty
cant remember where it is or what it looks like but I think @123hotchef @Nick or @tmw4562 might be able to help you
SOUTHWEST ENGLAND - AREA REP
2003 4life now sold
2011 walkinshaw , lego mechanic
Posts: | 17.335 |
Date registered | 10.21.2011 |
it is a invertor to step the voltage up to AC take the seals off and follow the wires back from the blue strip to the little inverter it is smaller than a box of matches, if you have a meter you can test the voltage before and after.
I have some spare stips and invertors here if you find they are dead and need some just shout.
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.226 |
Date registered | 02.15.2012 |
Much appreciated guys.
Now I know what to look for I will get checking and get back to you.
Thanks again
Regards
Barry
Hi chaps, I have a similar problem, mine is a 2016 barbarian. The passenger side is not working at all and the drivers side has a partially illuminated sill plate. Any ideas much appreciated
Rod
Quote: A guest wrote in post #5
Hi chaps, I have a similar problem, mine is a 2016 barbarian. The passenger side is not working at all and the drivers side has a partially illuminated sill plate. Any ideas much appreciated
Rod
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.226 |
Date registered | 02.15.2012 |
you need a new one
AREA REPRESENTATIVE: South East England
'PYROCHEF'
Posts: | 34.226 |
Date registered | 02.15.2012 |