cut a long story short, mrs krutly's peugeot seems to eat stop and tail lights/bulbs/lamps , whichever you decide to call them
I've none left to swap them out with this time so my hayabusa has had to sacrifice it's lights/bulbs/lamps so that the pug may stand a fighting chance of passing the MOT
I'm gonna have to replace the bike bulbs so thought I'd do the truck ones while I'm at it. Has anyone fitted LED stop/tail bulbs to their truck that are actually any good ?
there is so much tat on ebay that I'd prefer some personal recommendations from you guys before I order some

@krutly what bulb numbers are they as I have a pack of Prism 380 you can have if they fit.

not looked at what are in the truck yet (unless someone else knows) but the ones I took out the bike that went in the pug are dual filament stop and tail p21/5w 380 with pins at 180 degrees to each other with one pin higher up than the other on the barrel (if that makes sense?)
I had some leds years ago that were seriously pants in the bike(before crees were invented) and were bordering on feckin dangerous as you could see them quite well from directly behind but they didn't give off much light at an angle and barely lit up the reflector.

@krutly The ones I have are 380's with 12 LED's. I have them in the truck at the moment and they are not too bad. They have been in about a year with no problem. The only thing is if you have a third brake light you will need to swap them to LED's otherwise it may cause earthing issues. If you want them PM me you address and I will pop them in the post.

the cre type ones are ace kurt they aint cheap though

Many thanks to Fatboy for sending me some bulbs and then refusing to take any money for them

thanks Martin , much appreciated

sorted how r they kurt u put em in yet

not yet bud, they'll be going into the hayabusa at the weekend

cool man are they the type with a few leds on them?

yes mate, they're not the cree type ones but the bike has no bulbs at all at the moment
I'll post some pics up when I fit them

cool