Got my Warrior a while back, Thought i would share with you all what i have done with it so far.
First was to de-chrome it all. As i am going for an all black look.
Painted The Mirrors, Grill And Roll-Bar. Put some New rear lights on Also,
Most likely going to tint/smoke them a little.
I will keep Updating this when i get the chance.
Hopefully the images uploaded, not sure the best way to do that :/
Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte) Bild entfernt (keine Rechte)

looking good mate

Took The Carpet and seats out.
Jet washed the carpets and then used Black Dye they turned out more of a dark grey
Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)
Steam Cleaned the seats,
Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)
Blanked Egr and removed cooler,
Next ill have to fix the oil leak, Keeps leaking all over the drive,

The seats came out nice.

With the oil leak . Check the rocker cover gasket and half moon seal. My old truck was l3aking everywhere and th3 last owner had been quoted up to 1k to fix it . I changed the gasket and seal for £10 and voila no more oil leak .

As Animal says , half moon seal at the back of the head is notorious for leaking on these

Yeah I had a look and it does seem to be coming down from the top back of the head and then it is just spreading everywhere.
Ordered The Gasket and half moon thing.
Thanks for the info

did u opt for the ali half moon @CallumD

Got the rocker gasket set from milners

no then lol

keep up the good work

Fitted A 2 inch Body lift. Havent Done the Bed Yet.
And new Brake Hoses.
Bild entfernt (keine Rechte)
Cut out the Lever Surronds, didnt bother bending them.
And Put some nice leather Knobs on .
Bild entfernt (keine Rechte)
Also Fixed the Oil leak
Put new oil in, and new Oil filter on.
Took the bumper off and cleaned all the front down and painted it
Also fitting some new foglights
Bild entfernt (keine Rechte)

Looking very nice good work

looking good man

Got my New Wheels on
Had to cut the arches a bit to make them fit . Tyres are 33"
Bild entfernt (keine Rechte)
Also Undersealed the Arches.
Got rid of the old bed liner.
Going to Underseal the whole underbody next
and fix the towbar

looking nice fella

coming along nicely

Undersealed All underneath now.
Also Painted the side steps
Got some extended Arches
Bild entfernt (keine Rechte)
Still haven't Lifted the bed, Not sure if i will be able put the bike on if i do
Its hard enough as is
Bild entfernt (keine Rechte)

sorry to shout but .......... GET THAT REAR BED LIFTED !!!!!! .......... it's only 6 bolts and it'll look tons better once you've done it

I will get it done soon

Finally lifted the bed ;)
Painted almost all the chrome black only the rear bumper piece left
fitted some wind deflectors.
Bild entfernt (keine Rechte)
Fitted a steering wheel Cover and some seat covers. They fit nicely
Bild entfernt (keine Rechte)
Bild entfernt (keine Rechte)Bild entfernt (keine Rechte)

Also got a new radiator as it was leaking, But still seems to leak cant see a leak anywhere
but when i check the radiator i cant see the coolant anymore, so gotta keep refilling it. Loses about 1 litre at most. Anyone any ideas of what that could be

Fitted New Gauges just need to wire the water temp sensor up
Also painted some dash parts.
Bild entfernt (keine Rechte)

May have found the cause of the Radiator losing coolant
One of the heater pipes has a hole in it and leaking out coolant, there could be more holes so gonna keep looking.
Bild entfernt (keine Rechte)

Change all the hoses

Yeah i was planning on changing them all out. be a lot easier then trying to find which hoses have little holes in them

great work there