L200 2005 EML

#1 by jpj2424 , Sat Jan 30, 2021 2:31 pm

Hi. For some reason my engine management light as come on. This happens once the engine is warm then stop/idle. Not in limp mode tho. Nxt time I use the vehicle eml is cleared. A problem Ive had for years which has never caused any probs is intermittent turbo lag low down in the revs. Sometimes no matter how long u keep foot on accelerator the revs only climb so high then I have 2 change gear but no eml triggered.

Any advice is welcome. Many thanks.... jj


Silver 55 Plate, Classic Warrior, EGR Blanked off, Front Bull Bars, Ifor Williams canopy.


jpj2424  
jpj2424
Posts: 5
Date registered 05.12.2015


RE: L200 2005 EML

#2 by Heathen , Sat Jan 30, 2021 4:05 pm

Does this happen below 1500rpm? that's roughly when the turbo should kick in. You need to get the fault codes read to make further progress. You can do this without a code reader, instructions are here: Read your fault codes.


'02 K74 single cab.


 
Heathen
Posts: 1.131
Date registered 05.20.2016


RE: L200 2005 EML

#3 by jpj2424 , Sat Jan 30, 2021 4:56 pm

Yes it does. It takes 2500 rpm's for turbo to kick in when the issue is in play. Thanks will check that link out...jj


Silver 55 Plate, Classic Warrior, EGR Blanked off, Front Bull Bars, Ifor Williams canopy.


jpj2424  
jpj2424
Posts: 5
Date registered 05.12.2015


   

4WD Disengaging
2013 EGR Valve.

Xobor Create your own Forum with Xobor